Fine Wire Drawing Machine with AnnealerDelivery term:The date of payment from buyers deliver within days
- Total supply:
The date of payment from buyers deliver within days
Browse the number:
LISTRONG machines are designed with the assistance of last technology to fulfill varied requirements of the users. The machine is utilized to draw Ф8mm copper rod into Ф1.7mm-Ф3.0mm. The drawing capstans are arranged in a line. Besides, the machine is not only easy to be operated but also simple to be maintained.
Application: It is used for copper rod drawing from 8mm to 1.7-3.0mm.
Main components of machine:
1. Optimized wire cooling/lubrication (fully-immersed drawing basin)
2. Helically geared precision gearing for extremely smooth operation and uniform load transmission
3. vibration-damping black cast iron housing for long service life
4. Highly reliable separation of drawing emulsion and gear oil via mechanical seal(long service intervals)
5. user-friendly design
Model: LISTRONG-13DT copper rod drawing machine
Q: Causes of frequent breaking in wire drawing production?
A: 1. Normal wear of the drawing dies during continuous production, the diameter will be enlarged;
2. Quality problems of raw materials. In the production process, the raw materials are irregularly faced with quality defects, which make the single wire broken by all kinds of unpredictable tension during drawing deformation. This situation is less in good quality raw material drawing.
3. Unsteady annealing current in production, when the current is suddenly high, the single wire is pulled or fused by sudden strong current during annealing.
Solution: Before production, the copper rod should be fully self-checked, the quality defects of the copper rod should be found in time, the corresponding countermeasures should be found in time according to different situations, or the drawing speed should be reduced, or the defects in this section should be eliminated. To constantly observe whether the annealing current of drawing is normal during production, especially when it is just started, the variation of annealing current should be paid special attention to, and the annealing current should be adjusted according to the change of line speed, so that the annealing current is gradually increased with the increase of line speed to ensure the normal operation of the equipment.
Q: What’s the main advantage of LISTRONG-13DT copper rod drawing machine?
A: It is a safe investment choice for wire & cable making factory. The main advantages are:
1. High surface quality of the wires due to the optimized wire path (2°C inclination of the gearing/drawing capstans)
2. Touch screen and PLC control, reduced downtime for user guidance and fault display.
Packaging details: wooden box, PE film, wooden/steel pallet.
Delivery Time: within 60 working days after confirming the order of the copper rod drawing machine.